Lets Beef - Battle Rap Forums - View Single Post

**Brayne Ded** · #15 05-22-2019, 05:23 PM

I used to form mild steel. Anything from 24g to 1/2". It would come in as 4x8 or 5x10 sheets. We'd cut out the blanks for parts on a carbon laser or a pneumatic punch then form them with hydraulic press brakes. We also did a lot with wire from diameters of .0875" to 3/8".

**Brayne Ded** · 05-22-2019, 05:23 PM

I used to form mild steel. Anything from 24g to 1/2". It would come in as 4x8 or 5x10 sheets. We'd cut out the blanks for parts on a carbon laser or a pneumatic punch then form them with hydraulic press brakes. We also did a lot with wire from diameters of .0875" to 3/8".

05-22-2019, 05:23 PM	#15
Brayne Ded <SCHIZOPHRENIC> Join Date: Mar 2019 Voted: 0 audio / 36 text Posts: 354 Mentioned: 99 Post(s) Tagged: 7 Thread(s)	I used to form mild steel. Anything from 24g to 1/2". It would come in as 4x8 or 5x10 sheets. We'd cut out the blanks for parts on a carbon laser or a pneumatic punch then form them with hydraulic press brakes. We also did a lot with wire from diameters of .0875" to 3/8". __________________
Offline